Gear racks
Production of gear racks up to module 40 per DIN 3962-1 or with special profile form and lead-in angle.
The gear racks are chucked in groups on a magnetic clamping chuck and ground simultaneously. Grinding wheels with a diameter of up to 500 mm and a width of up to 100 mm can be used to grind multiple teeth at the same time depending on the module. The calculation and dressing of the grinding wheel for the corresponding tooth profile is done inside the machine. Profiling dressing at any time in the grinding cycle can be programmed.
Straight racks
Straight racks are profiled automatically in the machine from a solid or pre-manufactured blank, including the dressing cycles for the grinding wheels. The shape of the grinding wheels as well as the geometry parameters will be calculated from the gear shape.
Helical racks
Helical racks are profiled fully automatically in the machine from a solid or pre-manufactured blank, including the dressing cycles for the grinding wheels. The shape of the grinding wheels as well as the geometry parameters will be calculated from the gear shape.