End mills
QUINTO Qg1 contains a database for all popular end mills types for producing or resharpening.
Thanks to the NTTE function, the finished tool is just a few steps away. There are numerous software tools available to provide support for the tooling engineer.
Standard endmills
Cylindrical and sinus end mills, sharp-corner, with chamfer or corner radius. Complete range of conventional geometries and interactive 3D simulation.
Radius end mill
For experienced users there are various options available to change the gshing configuration and to blend it with the radius and flute.
Ball nose end mill
The combination of end face angle, face clearancee and width enables a perfect seamless blend of the two center cutting wings to create the perfect ball shape. In addition, there are also different gashing types up toand including a S-shaped end configuration.
Sinus-edge cutter / ctest cut
Flutes and contours are wave formed with a constant cutting and clearance angle. There are two different options for grinding these tools, with a pin mounted high speed and high-frequency spindle for high amplitude configuration or simply with a cup wheel.
Roughing cutter
Roughing endmills for high stock removal, fact profiled or radially relief-ground. With or without helical flute of the roughing profile. The roughing profile can be manufactured with a torus radius wheel or a profiled wheel.
Shape/profile endmills
Profile endmills with helical flute, shear angles or staggered flutes and free definitions of the radial and axial clearance angle as well as automatic grinding path calculation. The profile can be programmed over different edges. The DXF profile is generated directly in the machine or imported. During manufacturing, the distortion of the profile will be automatically calculated based on the helix and the flute shape.
Band saw cutter
These tools are used to manufacture band and jig saws blades. The challenge when grinding and re-sharpening band saw cutters lies in combining the constant raise, taper angle, flute depth and undercut dimension. Mathematically, this is no simple task, but Qg1 can resolve this elegantly and simply for the end user.
disc-shaped tools
Straight or staggered-tooth disc cutters, T-slot cutters, dovetail cutters, prism cutters with chamfer, radii and profile per DIN 885A or as a custom design.
T-slot cutter
Straight or staggered tooth T-slot cutters. Sharp-edged, with chamfer or corner radius. Production and regrinding. Simply parameterized and simulated in 3D.
Prism milling cutters
Pointed, trapezoid, radius-shaped per DIN 842 A / 847 or optionally with custom profile in DXF format. Flat, V-shaped or staggered-tooth cutting. Grinding the clearance surfaces, the face and double sideed gashing in a single clamping.
HSC Fräser
Hochvorschubfräser für Stirnschlichtprozesse mit Eckenradius in einen zweiten frei positionierbaren Stirnradius. Von diesem geht die Schneide typischerweise tangential in einen Stirnhohlschliff.
HFC Fräser
Hochvorschubfräser für Stirnschlichtprozesse mit Eckenradius in einen zweiten frei positionierbaren Stirnradius. Von diesem geht die Schneide typischerweise tangential in einen Stirnhohlschliff.